Maxillary sinus floor augmentation with autogenous bone graft compared with composite grafts: A one-year single-blinded randomized controlled trial.

OBJECTIVE: The objective was to assess the one year implant treatment outcome and patient-related outcome measures (PROMs) following maxillary sinus floor augmentation (MSFA) with autogenous bone graft (ABG) from the zygomatic buttress (control) compared with 1:1 mixture of ABG and anorganic porcine bone mineral (APBM) (Test I) or biphasic bone graft material (BBGM) (Test II). MATERIALS AND METHODS: Sixty healthy patients (34 females, 26 males) were randomly allocated to either control or test groups. Outcome measures included survival of suprastructures and implants, implant stability quotient, health status of peri-implant tissue, peri-implant marginal bone loss, frequency of complications, and PROMs using Oral Health Impact Profile-14 combined with questionnaire assessing patient perception of peri-implant soft tissue, prosthetic solution, implant function, and implant treatment outcome using visual analogue scale. Mean differences were expressed with standard deviation and 95% confidence interval. Level of significance was .05. RESULTS: All suprastructures and implants were well-functioning after one year of functional implant loading. There was no significant difference between control and test groups in any of the applied outcome measures. The implant stability significantly increased from implant placement to abutment connection within all groups (p < .001). High patient satisfaction and significant improvement in oral health-related quality of life was also reported within all groups. CONCLUSION: This study demonstrates that MSFA with composite grafts containing minimal amounts of ABG reveals comparable implant treatment outcomes as compared with ABG alone, after one year of functional implant loading. Extensive ABG harvesting in conjunction with MSFA therefore seems not to be needed.

Digital planning and bone regenerative technologies: A narrative review.

OBJECTIVES: The aim of this narrative review was to explore the application of digital technologies (DT) for the simplification and improvement of bone augmentation procedures in advanced implant dentistry. MATERIAL AND METHODS: A search on electronic databases was performed to identify systematic reviews, meta-analyses, randomized and non-randomized controlled trials, prospective/retrospective case series, and case reports related to the application of DT in advanced implant dentistry. RESULTS: Seventy-nine articles were included. Potential fields of application of DT are the following: 1) the use of intra-oral scanners for the definition of soft tissue profile and the residual dentition; 2) the use of dental lab CAD (computer-aided design) software to create a digital wax-up replicating the ideal ridge and tooth morphology; 3) the matching of STL (Standard Triangulation Language) files with DICOM (DIgital COmmunication in Medicine) files from CBCTs with a dedicated software; 4) the production of stereolithographic 3D models reproducing the jaws and the bone defects; 5) the creation of surgical templates to guide implant placement and augmentation procedures; 6) the production of customized meshes for bone regeneration; and 7) the use of static or dynamic computer-aided implant placement. CONCLUSIONS: Results from this narrative review seem to demonstrate that the use of a partially or fully digital workflow can be successfully used also in advanced implant dentistry. However, the number of studies (in particular RCTs) focused on the use of a fully digital workflow in advanced implant dentistry is still limited and more studies are needed to properly evaluate the potentials of DT.

Application of sticky bone combined with concentrated growth factor (CGF) for horizontal alveolar ridge augmentation of anterior teeth: a randomized controlled clinical study.

OBJECTIVE: This study was designed to estimate the effect of sticky bone combined with concentrated growth factor (CGF) on anterior alveolar horizontal augmentation during implantation. METHODS: Twenty-eight patients were randomly assigned to either the test group (Group 1, n = 14) or the control group (Group 2, n = 14). Patients in Group 1 and Group 2 underwent GBR using sticky bone combined with CGF and bone powders mixed with saline, respectively. On postoperative Day 7, the patients completed the visual analogue scale (VAS). Three-dimensional models of maxillary alveolar bone were reconstructed from CBCT data at different periods, and the bone volume conversion rate was calculated with the assistance of a measurement marker guide. Labial bone thickness before and after trauma closure and bone density at six months postoperatively were also measured. RESULTS: The mean bone volume conversion rate for Group 1 (72.09 ± 12.18%) was greater than that for Group 2 (57.47 ± 9.62%, P = 0.002). The VAS score was lower for Group 1 than for Group 2 (P = 0.032). At six months postoperatively, greater bone density was found in patients in Group 1 than in those in Group 2, although the difference was not statistically significant (P > 0.05). The change in the thickness of the labial bone graft material in Group 1 was smaller than that in Group 2 (P = 0.025). CONCLUSION: Sticky bone combined with CGF was able to achieve better bone augmentation than conventional GBR. With excellent mechanical properties and the capacity to release growth factors, sticky bone is an ideal material for bone grafting. TRIAL REGISTRATION: The study was registered at the Chinese Clinical Trial Registry on 10/04/2022 (Identification number: ChiCTR2200058500).

Time management in multistep periodontal and implant treatments: a practical guide.

In addition to the proper selection of techniques, appropriate treatment sequencing and prioritization are prerequisites for successful periodontal and implant procedures. The aim of this study was to provide evidence-based time frames for various procedures pertaining to periodontal and implant treatment. A literature review was conducted to collect data on tissue healing; in areas in which data were lacking, the viewpoints of experienced clinicians were solicited to establish a consensus. This review reports recommended time frames for the healing processes associated with surgical crown-lengthening procedures (both functional and esthetic), fresh socket management, alveolar ridge management, soft tissue management, sinus floor augmentation, implant loading, and peri-implant defect management.

Horizontal ridge augmentation using guided bone regeneration with an association of particulate allografts mixed with platelet-rich fibrin, collagen membrane and tent-screws: A prospective study.

BACKGROUND: Guided Bone Regeneration (GBR) is a versatile technique employed not only to correct pre-implant alveolar bone defects but also to facilitate bone defect correction during simultaneous implant placement. The effectiveness of GBR varies significantly among different protocols, as reported in the literature. This study specifically aimed to radiologically evaluate the horizontal bone gain obtained using a GBR procedure combining a particulate allograft, platelet-rich fibrin, resorbable collagen membrane, and screw tents. MATERIALS AND METHODS: A total of 42 patients with an insufficient alveolar bone width for dental implant placement were treated with a GBR technique using a mixture of particulate allograft (demineralised freeze-dried bone allograft 300-500 and 500-1000 µm), advanced platelet-rich fibrin (A-PRF), resorbable collagen membranes and screws tents (1.2 mm in diameter). Over the course of the study, a total of 63 GBR procedures were performed on these patients. Bone gains were measured by cone-beam computed tomography at 9.1 ± 2.0 months post-operative. RESULTS: A significant mean increase (P < 0.001) of 3.2 ± 0.9 mm at the sites of the greatest bone defect was observed. This improvement was consistent across various locations, including both maxillary and mandibular regions, and in cases of terminal and embedded edentulism, without any post-operative complications during the entire post-operative follow-up. All patients benefited from implant placement following the bone augmentation protocol. CONCLUSION: GBR combining particulate allografts, A-PRF, collagen membranes, and screw tents achieves reliable, predictable, and reproducible clinical gains that allow for future implant placement.

Ridge preservation combined with open barrier membrane technique in case of post-extractive oro-antral communication: a case series retrospective study.

After dental extraction a physiological phenomenon of reabsorption of the dentoalveolar process is triggered, especially if periradicular lesions are present, which can sometimes be associated with oro-antral communication in the upper posterior maxilla. With the aim of proposing a minimally invasive approach, 19 patients undergoing tooth extraction in the postero-superior maxilla were recruited. All cases presented an oroantral communication with a diameter of 2-5 mm after tooth extraction and the alveolar process, in some cases, with a partial defect of one or more bony walls. In these cases, a single surgical procedure was used to preserve the alveolar ridge with an open barrier technique with exposed d-PTFE membrane. The bottom of the extraction socket was filled with a collagen fleece and the residual bone process reconstructed using a bio-material based on carbonate-apatite derived from porcine cancellous bone. After 6 months all patients were recalled and subjected to radiographic control associated to an implant-prosthetic rehabilitation plan. Data relating to the sinus health status and the average height and thickness of the regenerated bone were collected. Radiographic evaluation verified the integrity of the maxillary sinus floor with new bone formation, detecting a vertical bone dimension between 3.1mm and 7.4mm (average 5.13mm ± 1.15) and a horizontal thickness between 4.2mm and 9.6mm (average 6.86mm ± 1.55). The goal of this study was to highlight the advantage of managing an oro-antral communication and, at the same time, to obtain the preservation and regeneration of the alveolar bone crest. The open barrier technique appears to be effective for the minimally invasive management of the oro-antral communication up to 5mm in diameter in post-extraction sites, with a good regeneration of hard and soft tissue.

Mechanical Characteristics of Individualized Biodegradable Augmentation Scaffold-In Vitro Pilot Study.

The alveolar ridge reconstruction of vertical and combined bone defects is a non-predictable procedure with varying percentages of success. The greatest challenge for vertical and combined bone augmentation is to maintain mechanical stability of the bone graft; therefore, it is mandatory to provide and preserve space for bone regeneration. The development of biomaterials and 3D printing has enabled the use of polymer scaffolds in the reconstruction of alveolar ridge defects. The aim of this pilot study was to evaluate the mechanical characteristics of an innovative individualized biodegradable polylactic acid (PLA) scaffold, under dynamic conditions, simulating biodegradation and the influence of masticatory forces. After the design and 3D printing of PLA scaffolds, two groups of 27 scaffolds were formed according to the compression testing procedure. The compression tests were performed in occlusal and lateral directions. In each of the two groups, nine subgroups of three scaffolds were formed for different testing periods during in vitro degradation with a total period of 16 weeks. Results showed that biodegradation and load application had no significant influence on mechanical characteristics of tested scaffolds. It can be concluded that simulated masticatory forces and biodegradation do not significantly influence the mechanical characteristics of an individualized biodegradable augmentation scaffold.

Evaluating risk factors and complications in mandibular ramus block grafting: a retrospective cohort study.

OBJECTIVES: This retrospective cohort study aimed to identify the complications and risk factors associated with alveolar grafting using autologous mandibular ramus grafts, guided by the research question: What are the complications encountered in patients undergoing alveolar bone grafting using autologous mandibular ramus block and what are the risk factors associated with the development of these complications? MATERIALS AND METHODS: The study included 70 patients who underwent alveolar crest augmentation with autologous mandibular ramus block grafting. Intraoperative, early postoperative, and late postoperative complications were analyzed, as were various risk factors. RESULTS: The results showed that the majority of patients had successful outcomes with minimal complications. Sex was found to significantly influence the visibility of the inferior alveolar nerve (IAN). Early postoperative complications were associated with IAN visibility and the use of a single screw for graft fixation. Late postoperative complications were significantly associated with the presence of infection. CONCLUSION: The findings emphasize the importance of careful surgical techniques, infection prevention, and patient selection in minimizing complications. CLINICAL RELEVANCE: This article may contribute to clinicians' and so patients' understanding of potential risk factors associated with over all ramus block grafting procedure. Based on this information, clinicians can also improve their ability to manage risk factors and associated complications and compare ramus block grafting with other alternatives to determine the best treatment approach for that particular patient.

The nasal spine suture: A novel approach for membrane stabilization.

BACKGROUND: Current evidence acknowledges guided bone regeneration (GBR) as a predictable therapeutic modality in the augmentation of a deficient alveolar ridge. Such deficiencies often reveal inadequate bone volume to support implant placement in a position amenable to prosthetic reconstruction. Additionally, an evolving body of literature demonstrates that membrane fixation may lead to improved clinical bone gain through positively influencing blood clot formation, stability, and the eventual osteogenic potential of the defect. Alternative benefits to membrane fixation, such as reduced graft displacement and reduction in wound micromotion, have also been cited as mechanisms for an increased regenerative response. METHODS AND RESULTS: The aim of this report was to present a case, including diagnosis, treatment, and follow-up for the reconstruction of a horizontal ridge deficiency. The patient's deficiency in ridge volume was found to be a developmental sequelae of lateral incisor agenesis, resulting in an underdeveloped midfacial region of the alveolar process subjacent to sites #7 and #10. The fixation protocol outlined in this report demonstrated adequate horizontal ridge augmentation to facilitate future prosthetic reconstruction with the use of implants. CONCLUSIONS: Numerous protocols have been established in an attempt to achieve effective barrier membrane stabilization for bone augmentation procedures. However, some techniques are poorly suited for the anatomically challenging region of the anterior maxilla. A case report describing the utilization of the anterior nasal spine for anchorage of a membrane-stabilizing suture may present a novel, safe, and effective technique for stabilizing the intended region of augmentation, as well as preventing graft migration beyond the membrane-maxilla interface. Key points Regarding guided bone regeneration (GBR) procedures, micromotion of the membrane or of the underlying particulate graft may negatively influence the volume of the augmented site. The ability to adequately stabilize the graft-membrane interface is recognized as a necessary prerequisite to predictably achieve optimal surgical outcomes. To the authors' knowledge, there is no clinical or scientific evidence regarding the use of the anterior nasal spine for membrane anchorage in maxillary GBR procedures, and thus a novel approach to membrane stabilization is introduced.

Risk Factors for Early Implant Failure and Selection of Bone Grafting Materials for Various Bone Augmentation Procedures: A Narrative Review.

Implant therapy is now an established treatment with high long-term success and survival rates. However, early implant failure, which occurs within one year of superstructure placement, occurs at a higher rate than late failure, which is represented by peri-implantitis caused by bacterial infection. Furthermore, various risk factors for early failure have been reported, including patient-related factors, such as systemic diseases, smoking, and bone quality and quantity, as well as surgery-related factors, such as surgeons' skill, osteogenesis technique, and selection of graft material, and implant-related factors, such as initial implant fixation and implant length diameter. Due to the wide variety of relevant factors reported, it is difficult to identify the cause of the problem. The purpose of this review is to discuss the risk factors associated with various types of bone augmentation which have a close causal relationship with early implant failure, and to determine the optimal bone grafting material for bone augmentation procedures to avoid early implant failure.

Vertical Ridge Augmentation with Customized Titanium Mesh Using a 3D-Printing Model: A Prospective Study in Humans.

PURPOSE: To evaluate the usefulness of ridge augmentation using a customized titanium mesh (CTM) that was preformed by trimming and bending the commercial titanium mesh on a virtually reconstructed 3D acrylic resin model using clinical, radiologic, histologic, and histomorphometric analyses. MATERIALS AND METHODS: This study was designed prospectively for patients who required vertical ridge augmentation using a staged approach before implant surgery. After installation of the CTM, grafting was performed using deproteinized porcine bone mineral covered with an absorbable membrane. Computed tomography was performed preoperatively and 6 months after simultaneous/staged guided bone regeneration to measure planned, reconstructed, and lacking bone volume, and the reconstruction rate was calculated based on these values. Clinical complications were also recorded, particularly the mesh exposure rate. At re-entry, the bone core was obtained using a trephine bur, and histologic and histomorphometric analyses were performed. RESULTS: A total of 10 sites in eight patients were used for the study analysis. The mean planned bone volume was 1.15 cm3 (range: 0.78 to 1.56 cm3), mean lacking bone volume was 0.13 cm3 (range: 0 to 0.59 cm3), and mean reconstructed bone volume was 1.02 cm3 (range: 0.56 to 1.43 cm3). The exposure rate was 30% (3 out of 10 sites). The reconstruction rate was over 80%, except for one case that showed suppuration. From histomorphometric analysis, 27.52% ± 16.87% of new bone, 7.62% ± 5.19% of residual graft, and 64.86% ± 23.76% of connective tissue were observed. The core biopsy samples demonstrated different pseudoperiosteum layer appearances based on the healing stage of the augmented sites. In the premature bone, the inner osteogenic layer consisted of multiple layers of osteoblast cells with adjacent large blood vessels. However, in the mature augmented site, there was no specific inner osteogenic layer, and the outer fibrous layer was dominant. CONCLUSIONS: The fabrication of CTM based on the application of the 3D-printing technique makes vertical ridge augmentation easier and can reduce complications and achieve target bone acquisition. In addition, it is expected that quantitative analysis of the pseudoperiosteum layer will be facilitated using the CTM.

Orthodontic Implant Site Development Using Labial Root Torque: A Case Series with CBCT Analysis.

This case series assessed the efficacy of Orthodontic Implant Site Development with Labial Root Torque (OISD-LRT) as a nonsurgical technique for addressing labial bone deficiencies in seven patients. The procedure involved strategically placing a multi-bracket of 2-3 mm apically on the hopeless teeth, gradually shifting them with Ni-Ti wires at the rate of 2 mm per month and maintaining overcorrection for 2 months before extraction. OISD-LRT consistently augmented tissue for flapless guided implant surgery, with an average treatment duration of 404Å}311.7 days. Cone-beam computed tomography (CBCT) scans at various stages revealed increases in both vertical and horizontal bone dimensions, especially in the sockets with complete labial bone loss. Despite inevitable post-extraction reductions in bone height and width, sufficient dimensions were maintained to ensure long-term implant stability. This case series highlights the effectiveness of OISD-LRT as a valuable method for horizontal bone augmentation, particularly in patients with labial bone deficiency. This approach provides a robust foundation for subsequent implant placement, showcasing its success in addressing challenging anatomical conditions and contributing to the broader field of implant dentistry.

Potentials of pure xenograft materials in maxillary ridge augmentation: A case series.

Many patients require edentulous ridge augmentation for dental implant placement. The main objective of this study was to evaluate the results of maxillary edentulous ridge augmentation exclusively with xenograft materials with and without simultaneous sinus floor elevation. This study reports the data retrieved from the records of 16 patients. The treatment outcome was assessed at least 6 months, postoperatively. Paired samples t-test or Wilcoxon Signed Rank test was used to compare the pre-and postoperative ridge dimensions. Dental implants were placed simultaneously in 7 patients, while 9 patients underwent delayed implant placement. In total, 68 implants were placed, and 12 patients also underwent maxillary sinus floor augmentation. A significant bone gain was achieved in both horizontal and vertical dimensions of edentulous maxillary ridges (P < 0.001). Ridge width increased by an average of 4.35 ± 1.90 mm (95% CI: 3.84 to 4.85 mm) while ridge height in areas of sinus floor augmentation increased by 8.19 ± 2.91 mm (95% CI: 7.33 to 9.05 mm). Within the study limitations, it appears that maxillary ridge augmentation according to the guided bone regeneration (GBR) protocols with exclusive use of xenograft particulate materials can provide optimal bone quantity for dental implant placement.

Retrospective study on the effect of adipose stem cell transplantation on jaw bone regeneration.

PURPOSE: In patients with jaw bone atrophy, dental implant therapy requires bone augmentation on the alveolar ridge. Common methods are autologous bone transplantation or bone substitutes. The latter technique is less surgically invasive because it does not require bone harvesting; however, blood supply from the surrounding tissues and local differentiation of osteoblasts are not guaranteed, so adequate bone regeneration for dental implant therapy is often not achieved. Therefore, at our hospital we introduced a bone regenerative medicine technique that uses adipose stem cells (ASCs) from adipose tissue. The new approach is less surgically invasive and appears to have a better effect on bone regeneration. The current retrospective study aimed to demonstrate the efficacy of ASC transplantation in patients who underwent alveolar ridge bone augmentation at our hospital. METHODS: We compared medical records, postoperative radiographic findings, and histological results from patients treated between January 2018 and March 2022 by augmentation of the jaw bone with bone substitutes (carbonate apatite) mixed with ASCs (ASCs+ group) and those treated with bone substitutes (carbonate apatite) alone (ASCs- group). RESULTS: After 6 months, the survival rate of augmented bone and the gray scale value in dental cone beam computed tomography (a bone density index) were significantly higher in the ASCs+ group than in the ASCs- group. Histological analysis at 6 months showed more adequate bone tissue regeneration in the ASCs+ group. CONCLUSIONS: The findings suggest the effectiveness of using ASCs in bone augmentation on the alveolar ridge in patients with jaw bone atrophy.

Factors influencing intraoperative and postoperative complication occurrence: A series of 1135 periodontal and implant-related surgeries.

OBJECTIVES: In periodontology, it is widely recognized that evidence characterizing the incidence and effect of treatment complications is lacking. The objective of this study was to assess the influence of operator-, procedure-, patient-, and site-associated factors on intraoperative and postoperative complication occurrence. MATERIAL AND METHODS: A single investigator reviewed records of patients treated by eight periodontics residents from July 2018 through June 2022. For each procedure, the investigator recorded each intraoperative and postoperative complication or indicated that no complication had occurred. These outcomes were analyzed against a panel of explanatory covariates. In addition, the severity of each postoperative complication was assessed using a standardized grading system. RESULTS: A total of 1135 procedures were included in the analysis. Intraoperative and postoperative complications were identified in 2.8% and 15.2% of procedures, respectively. The most common intraoperative complications were Schneiderian membrane perforation (1.3%) and gingival flap perforation/tear (1%), and the most common postoperative complications were dentin hypersensitivity (2.6%), excessive pain (2.5%), and infection (2.2%). Subepithelial connective tissue graft (odds ratio [OR]: 3.2, 95% confidence interval [CI]: 1.6, 6.1; p < .001), guided bone regeneration (OR: 3.0, 95% CI: 1.4, 6.5; p = .004), and guided bone regeneration with implant placement (OR: 3.1, 95% CI: 1.3, 7.6; p = .011) were associated with higher odds of postoperative complication, whereas lateral sinus elevation (OR: 102.5, 95% CI: 12.3, 852.9; p < .001), transalveolar sinus elevation (OR: 22.4, 95% CI: 2.2, 224.5; p = .008), open flap debridement (OR: 36.4, 95% CI: 3.0, 440.7; p = .005), and surgically facilitated orthodontic therapy (OR: 20.5, 95% CI: 1.2, 358.4; p = .039) were associated with higher odds of intraoperative complication occurrence. CONCLUSIONS: Consistent with previous reports, procedure type appears to be the predominant factor driving complication occurrence. As analyses of treatment complications increase, individualized risk-benefit assessments will become progressively meaningful for patients.

Dynamic navigation-assisted bone ring technique for partially edentulous patients with severe vertical ridge defects.

The autogenous bone ring technique is among the approaches for vertical alveolar ridge augmentation, and this technique can enable simultaneous implantation. However, the outcomes can be compromised due to donor site morbidity, shifting of the bone ring graft positioning, and inaccurate implant placement. In recent decades, dynamic navigation systems have been introduced into the field of implantology, allowing the accuracy of outcomes to be improved. This Technical Note describes the use of dynamic navigation to guide bone ring surgery, which is expected to enable more precise and predictable bone augmentation and implantation procedures, reduce the risk of injuries to the adjacent anatomical structures, and achieve better treatment outcomes.

In Vitro Handling Characteristics of a Particulate Bone Substitute for Ridge Preservation Procedures.

While particulate bone substitute materials are applied in a variety of augmentation procedures, standardized defects are being used for preclinical testing. This in vitro study evaluated the density and homogeneity of a particulate bone substitute in ridge preservation procedures. Premolars and molars were extracted in ten semimandibles of minipig cadavers. Light body impression material was used for determining the volume of the extraction sites followed by augmentation with particulate material, thereby weighing the graft material needed. Microradiographs and histologic sections were obtained for evaluating the homogeneity and density of the augmentation material. Statistical analyses were based on Shapiro-Wilk tests, Spearman's rho and one sample Wilcoxon test followed by Bonferroni-Holm correction for multiple testing (α = 0.05). Based on 103 single alveoli evaluated, the mean volume determined was 0.120 cm3 requiring a mean amount of graft material of 0.155 g. With only three exceptions, all parameters (volume, mass of augmentation material, density and homogeneity) correlated significantly (p < 0.020). The apical parts of the alveoli showed reduced density as compared to the middle parts (p < 0.001) and the homogeneity of the augmentation material was also lower as compared to the middle (p < 0.001) and cervical parts (p

Vertical alveolar bone augmentation of atrophied posterior mandibular regions with simultaneous dental implant placement using allogeneic bone rings vs autogenous bone rings: a randomized controlled clinical trial.

OBJECTIVE: Ideal implant placement in atrophied posterior mandibular regions is challenging due to surgical difficulties and anatomical limitations. This study aimed to evaluate the use of allogeneic bone rings for vertical augmentation of atrophied posterior mandibular regions with simultaneous implants compared to autogenous bone rings, while avoiding donor site morbidity. METHOD AND MATERIALS: A total of 24 vertically atrophied posterior mandibular segments (in 14 patients) were equally randomized into a study group in which mineralized freeze-dried allogeneic bone rings were used, and a control group in which autogenous bone rings with prepared implant osteotomies were harvested from the chin and used. All augmentation sites were prepared before inserting the bone rings. Implants were simultaneously inserted, fixing the bone rings into the native bone. All patients were clinically assessed after 1 week, 2 weeks, and 1 month. Crestal bone level was radiographically assessed after 1 week, 6 months, and 3 months of prosthetic loading. RESULTS: None of the 24 bone rings showed signs of implant or graft failure. There was no significant difference in the crestal bone level between the groups. CONCLUSION: Allogeneic bone rings can be a viable alternative to autogenous bone rings in augmenting the posterior aspect of the mandible, mitigating the concerns associated with donor site complications.

A novel approach for horizontal augmentation with split box: A method that combines split bone block and ridge split techniques.

PURPOSE: The aim of this study was to investigate the effectiveness of the split-box technique, a novel technique that combines the ridge splitting and split bone block techniques. MATERIALS AND METHODS: In this retrospective study, alveolar ridge defects were grafted using the split-box technique and its modifications, reverse split box and sliding split box. To determine horizontal changes in the alveolar bone, thickness was measured at two levels: crest width (CW) and screw level width (SLW). Alveolar ridge height (ARH) was also measured to detect a possible loss of vertical dimension. Measurements were performed using cone-beam computed tomography taken before the operation (T0) and at five months after the operation (T1). RESULTS: Of a total of 41 patients included, 21 were females and 20 were males with a mean age of 44.5 ± 13.3 years. A total of 64 regions were augmented. Among the augmented regions, split-box technique was used in 31 regions, reverse split-box technique was used in 14 regions, and sliding split-box technique was used in 19 regions. The increase at the SLW, CW and the decrease in ARH from T0 to T1 was statistically significant (p < 0.005). A significant difference was found between split box and its modifications in terms of bone gain at the screw level, and the sliding box technique was associated with more bone gain than the other two methods (p < 0.05). CONCLUSIONS: Split-box technique provides a comparable net gain in the alveolar crest width with lower complication risk than ridge split technique and lower postoperative morbidity than split bone block technique.

Particulate bone grafting with a resorbable collagen membrane and horizontal alveolar ridge augmentation with tenting screws in dental implant placement: A case report.

Key Clinical Message: We used a mixture of particulate bone grafts (xenografts/allografts) with tenting screws to prevent membrane collapse and covered the graft with a resorbable collagen membrane to guide bone regeneration. This strategy can exclude the need for additional procedures, such as non-resorbable membranes and major block grafting surgeries. Although the initial outcomes are promising, continuous follow-up is required to examine the stability of the newly regenerated bone and the long-term success of the implant. Abstract: This case demonstrates the use of particulate bone grafts covered with a resorbable collagen membrane and supported by tenting screws to correct horizontal alveolar ridge defects. A man in his 40s presented with missing maxillary anterior central and lateral incisors and required a fixed dental prosthesis. One year before, #12, #11, #21, and #22 had been extracted. The area showed horizontal and slight vertical bone loss. We used a mixture of particulate bone grafts (xenografts and allografts) with tenting screws to prevent membrane collapse and covered the graft with a resorbable collagen membrane to guide bone regeneration. After 6 months, complete bone regeneration was achieved, and the dental implants were submerged in the bone. After another 6 months, the patient was administered with a fixed dental prosthesis. This method can be used to correct horizontal alveolar ridge defects and achieve esthetic restoration without the need for more extensive procedures.